- Dimensions are 5" x 3/4" x 3/4"
- Price is for one pen blank
- Made with Alumilite Clear Slow Resin
- Painting tubes is recommended to ensure the brass tube doesn't show (I prefer white)
- Applying a top coat finish (i.e. CA finish) is recommended for best gloss and protection
- Some pinholes may occur in the pinecones, these can be filled with CA glue
- Pinecones can chip, it is recommended to turn carefully
The Alumilite Advantage!
Alumilite is by far the best resin I’ve found for casting pen blanks. It’s a joy to turn, and it easily polishes up to a high gloss. Finishing these blanks doesn’t get any simpler! Just sand it up to a high grit or use micro mesh pads, then finish it off with some plastic polish or on a buffing wheel.
GOOD BYE CHIPOUT!! Alumilite resin is not brittle like many of the mass produced or polyester resin blanks on the market. The blanks are cast under pressure to ensure there are no voids or trapped air bubbles in the resin.